The CNC Milling process

The CNC Milling Process
CNC milling apply a wide range of customized parts. CNC milling is a separation in the material is removed from a block of metal or plastic with a rotating tool. In the CNC milling cutting tool (a so-called "mill") has moved in all three dimensions to a desired form from the camp.

In this process the material is usually removed by the two at the end and on the side of the cutting tool. Unlike a drill material removed until the end, the CNC milling cutter rotates around an axis, perpendicular to the table, the work. Cutting different profiles available, including square, rounded and angled. A variety of shapes and part geometries are possible.

CNC Milling Machine

The most common are the "End Mill" ends on a flat surface, while below a "ball mill has a rounded end. A variety of 2D and 3D shapes are possible in the process. Some of the examples of CNC milling machines are an engine components, individual devices tool and mold, complex mechanisms, housing, etc. The thing CNC milling is doing very well, complex forms block. While CNC milling can be 2D projects, there are a lot of other options for thin stock. Water jet cutting and plasma cutting, for example, in the mind. But thick stock, metal, which removed? There seems CNC milling.

The CNC milling process is proving to be cost-effective for short runs. In the event that you run into large quantities of production, then it is advisable to consider cast and forged parts. If you are designing a new custom part, a wide range of cutting in mind. Depending on the quantity of production, you can model the cost of laser cutting, turret punch or Fixed beatings, and the occupation or forge decision.