What is turning machine?

As results from the operation, the machining of cylindrical parts. In its simplest form can be defined as the transformation of an outer surface :

- With a single point cutting tool and
-With the cutting tool parallel to the axis of the feed workpiece distance, the outer surface of the work.

Taper turning is almost the same except that the path is cut at an angle with the axis of the work. It is also the transformation of contour, the distance between the knife shaft work varied to produce the desired shape.

Turning Machine

Even if you do not specify a single point tool, it does not exclude it, multiple configurations of the tool, which are often used in rotation. In the settings, each tool operates independently as a single point cutter.

Factors adjustable cutting force in the transformation of

The three most important factors in a basic turning operation are speed, feed and depth of cut. Other factors such as type of material and type of tool is a great influence, of course, but these three are the ones who can change the operator by adjusting the controls right on the machine.



The speed, always refers to the axis and the workpiece. If it is in revolutions per minute (rpm), tells the specified speed. But the important number for a transaction of money mentioned, the surface velocity or speed with which material workpeece moving beyond the cutting tool. It is simply the product of the speed the size (in feet) of the piece before you start cutting. It is at the feet of the surface engineering per minute (SFPM), expressed, and refers only to the workpiece. Any other diameters on a workpiece cutting speed will have a different, but the rate remains the same.

RSS, always refers to the cutting tool, and is the pace at which the tool along the cutting path. Most Power-FED lathes, the feed rate is directly related to spindle speed and is in inches (the tool in advance) by revolution (the root) or intellectual property rights, he said. The figure, of course, usually much less than an inch and is displayed as a decimal value.

Depth of cut is virtually self-explanatory. Is the thickness of the layer against the workpiece or the distance from the uncut surface of the work away from the cutting surface, expressed in inches. Importantly, however, that the diameter of the workpiece by a smaller reduction than twice the depth, since this layer is removed from both sides of the work.